Templates

Whether you've hired a designer, or you're truly doing it all yourself; from jewel cases to vinyl, you will find all the necessary Copycats Media templates below!

Disc Imprint

TECHNICAL SPECIFICATIONS

DIMENSIONS

Outside Diameter = 117.45mm
Mirror Band = the space from 47mm to 37mm
Inside Ring = the space from 32.5mm to 17.475mm

REQUIREMENTS

Printing into the mirror band can cause color variation unless a solid background is used. The center hole must be knocked out.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Sleeve/Wallet

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 253.543 (9.985")
Total Height = 165.1 (6.5")
Panel Width = 127 (5")
Panel Height = 130.785 (5.125")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 5-inch Mini Sleeve.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 254mm (10")
Total Height = 127mm (5")
Panel Width = 127mm (5")
Panel Height = 127mm (5")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 282.575mm (11.125")
Total Height = 269.494mm (10.61")
Panel Width = 139.7mm (5.5")
Panel Height = 125.425 mm (4.938")
Spine = 3.175(.125")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 289mm (11.375")
Total Height = 250mm (9.8437")
Panel Width = 141mm (5.5625")
Panel Height = 125mm (4.9375")

REQUIREMENTS

Include a bleed of 3.175 mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 406mm (16")
Total Height = 127mm (5")
Panel Width = 127mm (5")
Panel Height = 127mm (5")

REQUIREMENTS

Include a bleed of 3.175 mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 422.9862mm (16.563")
Total Height = 269.494mm (10.61")
Panel Width = 137.3124mm (5.406")
Panel Height = 125.425 mm (4.938")
Spine = 4.7752mm (.188")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Digipaks

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 287.122mm (11.304")
Total Height = 250.825mm (9.875")
Panel Width = 140.176mm (5.519")
Panel Height = 125.219mm (4.93")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Contact COPYCATS' Design Department at 888-698-8008 with questions about this template.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 290mm (11.406")
Total Height = 269mm (10.61")
Panel Width = 142mm (5.594")
Panel Height = 125mm (4.938")

REQUIREMENTS

Include a bleed of 3.175 mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 427.298mm (16.822")
Total Height = 125.219mm (4.93")
Cover and Middle Panel Widths = 140.176mm (5.519")
Back Panel Width = 117.475mm (4.625")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 427.298mm (16.822")
Total Height = 125.219mm (4.93")
Cover and Middle Panel Widths = 140.176mm (5.519")
Back Panel Width = 117.475mm (4.625")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Can fold inward from left & right sides of tray, or roll fold inward from left side of tray. Contact COPYCATS' Design Dept. at 888-698-8008 with questions about this template.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Vinyl

TECHNICAL SPECIFICATIONS

DIMENSIONS

Outside Diameter 3.9439" (110.176mm)
Inside Diameter 0.2943" (7.476mm)

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 627.67mm (24.7114")
Total Height = 346.027mm (13.6231")
Panel Width = 311.849mm (12.2775")
Panel Height = 314.325mm (12.375")
Spine Width = 3.97mm (.1563")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a Sleeve.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 254mm (10")
Total Height = 127mm (5")
Panel Width = 127mm (5")
Panel Height = 127mm (5")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Horizontal
Total Width = 24.0464"
Total Height = 11.9729"
Panel Width = 12.031"
Panel Height = 12.0935"

Vertical
Total Width = 11.9729"
Total Height = 24.0464"
Panel Width = 12.0935"
Panel Height = 12.031"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a Sleeve.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 304.8mm (12")
Total Height = 304.8mm (12")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 609.6mm (24")
Total Height = 304.8mm (12")
Panel Width= 304.8mm (12")
Panel Height= 304.8mm (12")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 4-Panel folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Horizontal
Total Width = 14.5"
Total Height = 9.125"
Panel Width = 7.25"
Panel Height = 7.375"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a Sleeve.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

DL Card / Poster

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 85.725mm (3.375")
Total Height= 53.975mm (2.125")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 279.4mm (11")
Total Height= 431.8mm (17")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Tray Card

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total width, including spines = 150.5mm (5.925")
Total height = 117.5mm (4.626")
Spine width = 6.35mm (.25")
Actual back tray width = 137.8mm (5.425")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Bar codes should be black on a white background. You can reduce the barcode only if the width and heigh are reduced by the same amount (65% max).

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Insert

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 120.65mm (4.75")
Total Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width= 120.65mm (4.75")
Panel Height= 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 4-Panel folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 359.136mm (14.139")
Total Height = 120.65mm (4.719")
Cover and Middle Panel Widths = 120.65mm (4.75")
Back Panel Width = 117.475mm (4.625")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right and the back is on the far left when designing a 6-Panel folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 18.812"
Total Height = 4.719"
Cover and Inside Panel Widths = 4.75"
Third Panel Width = 4.6875". Fourth Panel Width = 4.625"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right and the back is second from right when designing a 8 Panel Roll Folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Booklet

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 8-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 12-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 16-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 20-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 24-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 24-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

DVD

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 10.75"
Total Height = 7.1875"
Panel Width= 5.09375"
Panel Height = 7.1875"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a Amaray-Style Case.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 4.937"
Total Height= 7.312"
Panel Width= 4.937"
Panel Height= 7.312"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 9.874"
Total Height= 7.312"
Panel Width= 4.937"
Panel Height= 7.312"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Blu-ray

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 10.5625"
Total Height = 5.875"
Panel Width= 5.0625"
Panel Height = 5.875"
Spine Width = .4376"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a Amaray-Style Case.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 4.625"
Total Height= 5.8125"
Panel Width= 4.625"
Panel Height= 5.8125"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 9.25"
Total Height= 5.8125"
Panel Width= 4.625"
Panel Height= 5.8125"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Can't find what you're looking for?
Other Miscellaneous Templates