CD Templates

All of the physical print templates for that 80 minutes of sweet, sweet music you've worked so hard on. So many options!

Disc Imprint

TECHNICAL SPECIFICATIONS

DIMENSIONS

Outside Diameter = 117.45mm
Mirror Band = the space from 47mm to 37mm
Inside Ring = the space from 32.5mm to 17.475mm

REQUIREMENTS

Printing into the mirror band can cause color variation unless a solid background is used.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Outside Diameter = 117.45mm
Silver Area = 89.824 mm

REQUIREMENTS

Outer edge must be on a separate layer than the inner circle artwork.
30 minutes of music on these discs.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Outside Diameter = 117.45mm
Center Non-holographic Area = 89.824 mm

REQUIREMENTS

Outer edge must be a grayscale or bitmapped image on a separate layer than the inner circle artwork.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Sleeve/Wallet

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 253.543 (9.985")
Total Height = 165.1 (6.5")
Panel Width = 127 (5")
Panel Height = 130.785 (5.125")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 254mm (10")
Total Height = 127mm (5")
Panel Width = 127mm (5")
Panel Height = 127mm (5")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 254mm (10")
Total Height = 127mm (5")
Panel Width = 127mm (5")
Panel Height = 127mm (5")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 282.575mm (11.125")
Total Height = 269.494mm (10.61")
Panel Width = 139.7mm (5.5")
Panel Height = 125.425 mm (4.938")
Spine = 3.175(.125")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 289mm (11.375")
Total Height = 250mm (9.8437")
Panel Width = 141mm (5.5625")
Panel Height = 125mm (4.9375")

REQUIREMENTS

Include a bleed of 3.175 mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 11"
Total Height = 10"
Panel Width = 5.5"
Panel Height = 5"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 422.9862mm (16.563")
Total Height = 269.494mm (10.61")
Panel Width = 137.3124mm (5.406")
Panel Height = 125.425 mm (4.938")
Spine = 4.7752mm (.188")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 421mm (16.576")
Total Height = 269.5mm (10.61")
Panel Width = 138mm (5.442")
Panel Height = 125.5mm (4.938")

REQUIREMENTS

Include a bleed of 3.175 mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Digipaks

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 287.122mm (11.304")
Total Height = 250.825mm (9.875")
Panel Width = 140.176mm (5.519")
Panel Height = 125.219mm (4.93")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Contact COPYCATS' Design Department at 888-698-8008 with questions about this template.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 290mm (11.406")
Total Height = 269mm (10.61")
Panel Width = 142mm (5.594")
Panel Height = 125mm (4.938")

REQUIREMENTS

Include a bleed of 3.175 mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 427.298mm (16.822")
Total Height = 125.219mm (4.93")
Cover and Middle Panel Widths = 140.176mm (5.519")
Back Panel Width = 117.475mm (4.625")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 17.675"
Total Height = 9.85"
Finished Width = 5.6"
Finished Height = 4.925"
Spine = .5"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 17.281"
Total Height = 10.61"
Finished Width = 5.594"
Finished Height = 4.938"
Spine = .312"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Tray Card

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total width, including spines = 150.5mm (5.925")
Total height = 117.5mm (4.626")
Spine width = 6.35mm (.25")
Actual back tray width = 137.8mm (5.425")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Bar codes should be black on a white background. You can reduce the barcode only if the width and heigh are reduced by the same amount (65% max).

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Insert

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 120.65mm (4.75")
Total Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width= 120.65mm (4.75")
Panel Height= 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 4-Panel folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 359.136mm (14.139")
Total Height = 120.65mm (4.719")
Cover and Middle Panel Widths = 120.65mm (4.75")
Back Panel Width = 117.475mm (4.625")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right and the back is on the far left when designing a 6-Panel folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 18.7"
Total Height = 4.719"
Cover and Inside Panel Widths = 4.75"
Third Panel Width = 4.6875". Fourth Panel Width = 4.625"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right and the back is second from right when designing a 8 Panel Roll Folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Booklet

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 8-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 12-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 16-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 20-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 24-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 24-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 32-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right when designing a 36-Page Booklet.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

Poster Fold

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 9.438"
Total Height = 9.5
Cover and Inside Panel Widths = 4.75"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right bottom panel and the back cover is on the left bottom folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 9.5"
Total Height = 14.1457"
Cover and Inside Panel Widths = 4.75"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right bottom panel and the back cover is on the left bottom folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.

TECHNICAL SPECIFICATIONS

DIMENSIONS

Total Width = 9.5"
Total Height = 18.781"
Cover and Inside Panel Widths = 4.75x4.719"

REQUIREMENTS

Include a bleed of 3.7mm (.125") on all four sides. Don't forget that the cover is on the right bottom panel and the back cover is on the left bottom folder.

MINIMUM LINES AND TYPE SIZE

Width is 0.5 pt. Letter size is 5 pt.
Line width knockout is 0.75 pt.
Letter size knockout is 6 pt. bold.